FAP Cermofix is a specially formulated polymer modified Tile Adhesive for fixing almost all types of tiles, such as ceramic wall and floor tiles, terrazzo, quarry/sand stones and marbles in both internal and external condition.
Headed concrete, mortar rendering and hard board plaster. The supports should be clean, sound, and free of dust and oily materials.
Aspect : Powder
Color : White/Grey
Density : 1.85g/cc
Flash Point : Not applicable
Pot life @ 30oC : 30- 40 min
Shelf life : 12 months
Mix FAP Cermofix in a ratio of 5 to 6 litres of water per 25 kg bag to a uniform lump free consistency. Leave for approximately 5 minutes to allow the resins to completely dissolve. Moisten the supports if necessary, but never the tile .Mixing should be by a forced action mixer. Hand mixing is recommended for small quantities only.
Apply FAP Cermofix to a uniform thickness of 3 mm to 6 mm on the support to cover the slots on the back of the tiles on an area of not more than 1m2 at a time. For horizontal applications a solid bed fix is recommended as well as for heavy duty vertical applications. For other vertical applications use a toothed spatula to comb horizontally to remove excess. The trowel should have 6 mm notches at 25 mm intervals centre to centre. Apply the tile, press it, and smooth out carefully so that the mortar is spread evenly. If the bonding is perfect, the tile will not slide. The joint can be filled with FAP Tile Joint.
Approximately 5 kg/m2 for 3mm bed thickness.
As with all chemical products, caution should always be exercised. Protective clothing, Such as gloves and goggle, should be worn. Should any of the products be accidentally swallowed, do not induce vomit but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labeling.